17. BRAKE SYSTEM MYROAD 700i Tighten the pad pin to the specified torque. Torque: 1.8 kgf·m Install the pad pin plug to the specified torque. Torque: 0.3 kgf·m Rear brake : Pad Pin Pad Pin Plug The rear brake pads and front brake pads replacement are all the same. BRAKE DISC INSPECTION Visually inspect the brake disc for damage or cracks. Measure the brake disc thickness. Service limits:Front: 4.5 mm Rear: 5.5 mm Replace the brake disc if the smallest measurement is less than the service limit. Measure the brake disc warpage. Service limits:0.03 mm 17-11