17. BRAKE SYSTEM MYROAD 700i Installation steps: Turn the parking brake caliper piston clockwise and push it into the parking brake caliper. Parking Brake Caliper Piston Pin Install the pad pin by pushing the pads against the pad spring to align the pad pin holes in the pads and caliper. Align the pin on the pad with the groove on the parking brake caliper piston. Groove Rear/Parking Caliper Body Bolts Install the rear/parking brake caliper to the rear fork. Install and tighten the new rear/parking brake caliper mounting blots to the specified torque. Torque: 3.2 kgf·m 17-10