grand dink 125 mmc 1 Manual-de-oficina : pagina 57

                    4. LUBRICATION SYSTEM                                                 GRAND DINK 125/150


                                                                             Bolts
 OIL PUMP REMOVAL
 First drain the coolant.
 Remove the right crankcase cover. ( 10-3)
 Remove the A.C. generator starter driven
 gear. ( 10-4)
 Remove the attaching bolt and oil separator
 cover.




                                                Oil Separator Cover

 Pry the circlip off and remove the oil pump
 driven gear, then remove the oil pump drive
 chain.




                                                    Circlip            Oil Pump Driven Gear
                                                                       Oil Pump
 Remove the two oil separator bolts to remove
 the oil pump.




                                                                       Oil Separator

 OIL PUMP DISASSEMBLY
 Remove the screw and disassemble the oil
 pump as shown.




                                                                                       4-4
                
Usamos cookies em nosso site para coletar estatísticas sobre visitas. Ao clicar em Aceito ou continuando neste site, você aceita o uso desses cookies.